Posted by Rumplestiltskin on June 16, 2010 at 17:03:14 from (96.12.218.14):
I just installed a Speedi-Sleeve on a 350 Utility PTO shaft. This is one of those situations where the shaft is way too long for the manufacturer-supplied installation tool.
The manufacturer recommends using a piece of pipe in this case, but I had a lot of trouble finding a pipe with a suitable inside diameter. I decided to use a piece of 1.5-inch I.D. PVC (a little too big), and cut several slices in one end using a band saw. I cut the slices about 2" long, aligned with the axis of the pipe. This allowed me to reduce the diameter of the pipe by squeezing it for a perfect fit on the Speedi-Sleeve. I added a hose clamp to keep the diameter where I wanted it, and it drove the sleeve onto the shaft just fine.
I think this driver is actually better than the manufacturer's tool, as that had a lot of "slop" and the PVC tool has none. If the hose clamp causes a clearance issue, it should be easy to substitute a piece of wire.
I'll try to post a picture (never done that before) of the tool holding the sleeve, as I'm sure it would be clearer than my description. My real purpose here is to get this into the archives for future reference.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.