Posted by Alex Brown on May 09, 2010 at 14:39:28 from (203.96.113.57):
I got my 1925 10-20 home from Grandad a couple of weeks ago and am trying to change a damaged front wheel on my tractor with another good wheel I got a hold of. The look identical side by side until the grease cap is removed
Anyways seems that several different bearings were used. My 25 has flat roller bearings and the other slightly later? wheel has taper roller bearings and the external diameter of the race is quite different.
Has anyone struck this? What can I do? Is it only the race diameter and the hub that is sized differently or are the spindles also different? My spindles have a key way but the wheel with the tapered bearings has a non keyed spindle.
Is there an easy way to make this wheel fit? Otherwise I am looking at having to use the good spare wheel but bore out one side of the hub a bit more and pack up the other side of the hub so the flat bearings will fit the new wheel.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.