Larry806 said: (quoted from post at 11:36:20 04/30/10) Before you take anything a part check the wheel bolts where the hub is clamped on the axel . I've saw more than one tractor hauled in thinking something was out in the rearend . All it took was new bolts .
Maybe on an M or a 560, but not on a 766. With the old clamp wheels, the bolts could come loose, the keys could fall out, and the round axles could spin in the wheel centers.
The axle on a 766 has a HUGE keyway that's part of the axle. It can't fall out, and for it to spin freely in the hub, a HUGE chunk o' hub would have to have broken out. The tractor would make an awful grinding noise but the noise would obviously be coming from the OUTSIDE. The tractor would also be going up and down about 2" on one side. Very noticeable.
Odds are that the TA is the main problem with this tractor.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
