The problem with the bushing is if it gets much wear on it it will allow the armature to touch the pole shoes and that will soon let all the magic smoke out of the generator.
Brush number 820517 has a slotted hole on one end and has no pig tail wire. I got that number out of my Delco book. It listed both main brushes and the third brush with the same number. Looking on line for the H generator parts listing I came up with # 1836664 for the main brushes and # 1880225 for the third brush. My electrical wholesaler crosses all of those numbers to the same brush.
Originally the third brush was softer. It doesn't have to carry as much current as the other two so it had more carbon and less copper. I still have a couple of the old third brushes on the shelf and you can tell them apart from the main brushes by their darker color.
The brushes with leads had the same differences but again the third brush has been discontinued and the main brush is used instead. They are also the same brushes as used in the two brush generators. Part numbers for those brushes are 1906940 or 1850078 for the third brush and 1906984 or 1880998 for the main brushes.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
