Farmall & IHC Tractors Discussion Board |
Re: Capacity 450 Hydraulic pump?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jerry on May 24, 2000 at 22:37:43 from (207.53.188.179):
In Reply to: Capacity 450 Hydraulic pump? posted by Leo on April 23, 1999 at 20:16:29:
Leo, Sent you an email but did not post so here it is. I beleive your problem may not be a pump or valve problem but a supply problem. Remove the pick up screen (four 5/16 inch bolts on right side of reservoir) from your hydraulic reservoir and see if it is plugged and collapsed. The fact your loader is working at all means the pump is most likely pumping. I went through my 450 system before I ever got it running and found the screen completely plugged and collapsed. Even if that is the problem, it would be wise to go through the whole system and clean it from stem to stern. Jerry
Follow Ups:
Home
| Forums
Today's Featured Article -
Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|