Posted by Jay Poole on February 25, 2010 at 06:55:16 from (129.252.212.4):
I have a 48 SA that has a Zenith 12911 carb on it. It came to me with a spring on the the carb side hooked to the governer link and run back and hooked on the air cleaner. I haven't gone into the engin but from all I can see it's a stock motor. This winter I replaced the intake Manafold, rebuilt the carb, tune-up that sort of thing and decided that I was going to get it back to stock. I set the throttle link as out-lined in the service manual and started her up... she only runs at wide open throttle... but the throttle plate is completely closed. I took the carb back apart and didn't see anything wrong, correct me if I'm wrong but isn't the the governer working and doing what it should, or is that where I should be looking. The service manual calls for a 10514 carb on this tractor but all I see says that the 12911 is a replacement for it. Thanks for any help.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.