Posted by Red Mist on February 01, 2010 at 18:13:48 from (67.142.130.48):
In Reply to: NF wedge-plate posted by Art Massing on January 30, 2010 at 11:10:23:
I've been through this discussion before here on the forum. I understand positive caster on a motorcycle (an exaggerated example is a long forked "chopper") and I understand positive caster on a car with upper and lower control arms - the ball joint on the upper arm being positioned behind the lower ball joint. In both those cases, the geometry causes the front tire/tires to return to center - or, putting it another way - to steer straight(er) or more true.
But, I still cannot get it through my head how installing the wedge with the thick end forward (moving the tire contact rearward in relation to the axis) can add positive caster. Seems to me it would reduce steering effort, but cause the tractor to be more apt to wander. Also seems to me if the wedge were installed with the thin end forward, turning effort would be slightly harder, but the wheels would be more apt to return to center and not wander as much. I'm sure I've probably got it backwards......
Either way, I have two wedges; one for the M series tractor and one for the H series. Neither is installed on a tractor. The M series wedge has no wording embossed on it. The H wedge has the word "Front" embossed on the thin end.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.