Posted by M Diesel on January 29, 2010 at 14:17:33 from (12.24.61.12):
In Reply to: 450 Chain posted by Red Mist on January 29, 2010 at 09:52:59:
Chris450 said: (quoted from post at 10:52:59 01/29/10) I have a 5/16 chain. Is that big enough for pulling logs. Or should i go bigger. I guess what im saying is will a 450 break a 5/16 chain.
The problem is always how it is unintentionally used. Snags are a concern, as are pulls that tend to kink the chain. An improperly set hook can cause link damage, and the main reason for bad links is people wrapping them around a drawbar. Links don't like to be drawn over a sharp edge. Using a grab clevis will generally stop most of that. In 5/16 you generally need a grade 70 to avoid breaking stuff, and 3/8" would be my choice. They are a bit spendy yes, but will serve you well for years to come.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.