The hydraulic block on the tractor requires a 7/8"-14 "90 Duro" O-ring fitting.
The standard female coupler from the factory is pictured. If it have international stamped on the collar, it is a safeway adapter. This will accept safeway and pioneer style male couplers.
If you were able to remove the adapter from the female coupler, it is just a 7/8"-14 x 7/8"-14, 90-Duro O-Ring adapter.
I'm still unclear what you're trying to replace or why, so I'll cover both. You can get both the 90 Duro O-ring and the internal 70 duro O-ring inside the female coupler if either of those leak. If you need a new Female coupler CNH 374780R92 is the only one I've been able to find. You will need to use the 7/8"-14 x 7/8"-14, 90-Duro O-Ring adapter as the coupler is female thread. If you can't find the factory replacement, you can use a straight adapter 7/8 O-ring to pipe. These are expensive puppies, so I just replace them with OEM.
If you can't get them to mate, A NPT standard pipe (what ever your loader hose requires) to safeway/pioneer coupler will work, as pictured above.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.