Posted by leroy in ne on November 27, 2009 at 19:06:54 from (67.63.106.62):
In Reply to: Stuck in one gear posted by Paul Klankowski on November 27, 2009 at 17:53:38:
been covered many times, search in archives (sp) easiest way is to drive pin out that goes thru shifter tower and shift lever, (their may be small soft plugs covering pin) lift shift lever out and look in hole, shift rails will be visible, use large screwdriver to line up out of position rail so all 3 slots are in line put shifter back in in neutral position, push down on shifter to compress spring and slide pin back in place. should be good to go. contributing factors to this happening is wear to end of shift lever ( can be built up with weld and ground/filed to original dimensions and shifting out of gear and moving lever over to quickly allowing shift rail to slide into next gear while shift lever is moved over to another rail. especially when shifting from 4th to reverse it will slide into 5th. did this many times as a14/15 year old while cultivating corn with 2 row equipment 50 years ago hope this makes sence leroy
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.