Posted by Tom Fleming on October 29, 2009 at 18:01:14 from (206.195.6.11):
I have a 1942 Farmall A that I bought with the intention to restore. The tractor had been owned by a "father and son" who had performed a "git 'er runnin'" "restoration", plus a 12 volt conversion.
So, I won't recap all of the things they did to it, and let's get to my adventure. The A had the Delco verticle distributor on it, and I wanted a magneto. Not a big deal, so I get the distributor and associated wiring removed. Get the engine on TDC. Go to put the mag on, and the old girl doesn't line up for #1 on the cap. So, I fiddle a bit, trip the impulse, and get it close. STarts up, but is way advanced on the timing, and runs like crap.
take mag back off. Set to TDC again, same thing, coupling doesn't line up with #1 on the cap. Scratch my head a bit, and take the govenor off. Pulled the govenor shaft, and yes, it was 4 teeth out of time. I guess it didn't bother the previous owner as they just adjusted for the out of time condition with the distributor. So, I get the gear timed on the govenor shaft, and put her all back together. fired on first rotation, and runs like a champ. :D
Just thought I would share because it was an unusual problem.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.