Posted by jdbrad1 on September 25, 2009 at 05:57:47 from (216.116.87.110):
I have a 58 340 that I have rebuilt and had head work done on it twice, but it still smokes. First round I found that the shop that did the head work did not put on the umbrella seals on the valve, just o-rings. So I pulled the head and took it to a different shop (one that knew about tractors) The guy there told me he could tell that the engine was burning oil but that it was not caused by the head. So while I have the head off I dropped the pan and pulled the pistons to check the rings. All of the rings looked good and where on correctly, I also made sure that the rings were 180% out for the top and second compression rings. Another thing that I discovered during the time that the head was off the second time was that the thermostat was not seating correctly in the housing. The retaining clip had come loose and was letting the coolant past. So the tractor never got to full running temp. My question is what type roll does the temp play in allowing the rings to seat? Also what should the running temp of a 340 be? I have been told 160 to 170
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
