Yeah, the light is too high. I just grabbed a piece of pipe from my junk pile and stuck it in there. The light is an after thought made possible by the pipe socket on the bottom of the mast carriage. I was wondering what I could use the socket for.
To start with hydraulic motors, one has to know the cubic inch displacement per revolution of both the pump and motor(s). CharLynn has most of the motor market. I am using a CharLynn geroter (model S). There are also H and T geroters made by CharLynn. Among those three types, there are probably fifty different displacements combined with port configs and output shaft options. I purchased this new motor on eBay for less than $100. That would probably be a savings of 80%. You will need to use the CharLynn site to identify the model number used in the eBay listings.
Fortunately, I had the clutch pump. Northern Hydraulics has three of these pumps with different displacements. They are not Borg-Warner. In fact, I think that B-W is out of the business. Pricing is around $520. You might find something cheaper on eBay.
I am out of easy PTO sources on my 400. My next four sources will come from the bottom of the IPTO driven gear. I will have to fabricate a double shaft PTO box that is double ended. It will bolt up to the underside of the center section with the eight bolts holes already provided.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.