Posted by Rootsy on July 30, 2009 at 05:20:21 from (24.247.111.162):
In Reply to: 560 controls posted by jlbeebe on July 29, 2009 at 14:35:05:
jlbeebe said: (quoted from post at 14:35:05 07/29/09) If I set it all the way down, will it apply more pressure to my blade when I"m doing grade work?
No it won't...
It is a traction control device. Down pressure on your blade should be no issue as it is, but in putting down pressure on the blade you will take weight off of the rear tires... That is where traction control comes into play.
First the fast hitch needs to be set to float. the locking pin in the cylinder mount pivot needs to be removed as well as the locking pins in the receivers. After that is finished you pull UP on the lever to increase traction control. So when you begin to lose traction the system will relieve down pressure on the implement in order to increase weight transfer to the rear tires.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.