Posted by Andy Motteberg on July 17, 2009 at 17:27:40 from (4.143.220.209):
Hi all,
I got my carb kit from Rice yesterday. I cleaned up the carburetor and put in the kit. The tractor runs a little better than it did, but its still not right. The Zenith K5 carburetor has 3 adjustment screws, one is for the low idle speed, and the other two I believe are air/fuel screws. The problem is, I can't get it tuned right, its either getting too much gas or too little, it runs down the road in road gear perfectly fine, but it does not idle well when I can't adjust it right, the air/or fuel screw that is on the top half of the carb does not hardly change the way the tractor runs, even if it is turned all the way in, I can even take that screw out while its running with no change. I cleaned a lot of passages with brake cleaner, compressed air and a torch tip cleaning kit. The only passages I did not clean are the ones near that adjustment screw, thaey are capped off with small brass plugs. My carb kit from Rice Equipment came with 2 of those plugs. MY QUESTION: How do you get them plugs out? I want to clean those passages as I bet thats the problem. The plugs are threaded in , but that are flat on top, no place the put a screwdriver on them, :? :? How do you get these out??? I'll probably use my F-20 in the tractor pull if I can get this carb figured out.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
