Posted by Janicholson on June 21, 2009 at 07:25:16 from (66.173.50.176):
In Reply to: 450 PTO posted by chris450 on June 21, 2009 at 07:08:35:
Assuming you have a band style PTO (I think they had two styles depending on Production Date.)
Simple as I can make it. Make sure the lever and linkage is free of lost motion and bad woodruff keys. Place the lever exactly mid way between the two latched positions. The PTO shaft should turn (with nothing hooked to it)by hand. Tighten the forward adjustment lock and screw until the band is tight and the shaft wont turn (by hand with good effort) Loosen it until the band is loose enough to turn freely (just enough, not 2 turns) Do the same for the rear adjuster. Now try moving the lever to the operate position. It should pull harder at the last few inches of travel, and lock in nicely. If it pulls hard enough that it seems wrong, the band is too tight. Do the same for the brake band (off). If the adjusters are almost down to level with the top of the lock nuts, there isn't much band left. Best of luck, JimN
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.