Posted by Hugh MacKay on June 17, 2009 at 14:50:43 from (216.208.58.139):
In Reply to: Gear noise in Super C posted by thumbanger on June 17, 2009 at 13:57:57:
Thumbanger: Time to get out the old broom handle. Jack one rear wheel of the tractor, as the weight comes off the wheel look for any movement between axle in relation to axle carrier. With wheel off ground, anchor another tractor to the drawbar for safety. Start the tractor in gear, let the jacked wheel turn free. Put one end of broom handle to your ear and other end on various places around transmission and rear end casting. Listen for noise, particularly the one your familiar with, you'll be amazed at what you can hear, move the broom handle around on casting, you should be able to zero in on the noise. Repeat the same with other wheel jacked. If you don't have a spare broom handle, and you want to be a bit more sophisticated, tool shops sell stethescopes for just that purpose.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.