Posted by Mark from WI on April 25, 2009 at 22:02:05 from (72.160.225.181):
I got done putting the wheels on the 300 this weekend and when I put the wheel weights back on I noticed that one of the wheel weights was turned differently than the other side. It isn't turned right around the hub bolts. It's off by a 1/4 turn. Couldn't figure it out till we noticed that the bolt holes on the hub for the weights were in different spots than the other side. Holes still lined up with the weights. Then we noticed the part numbers: 363019-R1 and 363019-R2. Whats the difference? I was thinking that the R2 number is superseded from R1. Dad had a hub replaced 20 some years ago. I'm sure it was used one he put on and was wondering if it came from newer tractor (350 or 460). I just couldn't figure out why the weight is turned. It just looks a little goofy to me like I don't know how to put the tractor back together.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
