The way an oil bath filter works (at least these work this way) is there is a mesh screen up inside the can. As dirty air is drawn in the heavier particles hit the oil and sink to the bottom while it picks up an oil mist and carries it up through the mesh. Dust attaches itself to the oily mesh screen and the oil mist that's carried up finally gets to heavy to stay there so it runs back down taking the dust with it. When the oil gets full of dirt it doesn't get sucked up as easy so the dirt doesn't get washed down as fast and the mesh builds up with an oily sludge to the point of plugging. So the can needs to come off periodically and be washed with solvent till it runs clear and the cup needs to be serviced often. Any cheap oil will work in it. 30 weight is good. The only reason the oil bath filter was discontinued was for economic reasons among other things not because it didn't work well. It is harder to make and costlier to maintain. By the way DON'T use waste oil in it as some small amount of oil is sucked into the engine and metal particles could be in the waste oil. ...Randy
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.