Presuming the metal friction surfaces are smooth (ie. not rusty or pitted), disc brake locking up is the result of excessive distance (wear) between the inner and outer non-moving friction surfaces. However it can also be caused excessive actuator plate ball ramp wear, slightly undersized actuating balls or wear (notching) of the brake shaft splines.
What’s happens is as the balls roll to the ends of the ramps they become wedged when the brake begins to take hold. Further movement causes the brake to "cam" and lock up. Backing the tractor unwedges the balls and releases the brake.
The ideal repair is new parts (inner housing, cover, actuating disc assembly). However you can probably accomplish the same thing by milling perhaps 0.10” off the cover mounting face - effectively decreasing the distance between the inner/outer friction surfaces.
Alternatively OEM Tractor Parts can rebuild Super series disc brakes - I don’t recall the cost however.
----
Incidentally from my personal experience the Farmall Super series disc brakes - with all internal parts within tolerance, clean (no oil!), and properly adjusted - work great…..better than the earlier band brakes IMHO.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.