What a lot of great replies! I just have a minute right now, but I'll add that the spark-retard was really intended to stop knocking when the engine was running on kerosene, which had a strong tendancy to detonate in advance of the normal firing point. If you heard knocking under a heavy load, you reached down and pulled the spark over to the left until the knocking stopped. Some models of this series (10-20, 15-30/22-36) had a third tank, for water. If the engine knocked, you could turn on a little water to drip in (through the manifold, I think, but am not sure). I guess this cooled things off. Maybe somebody else knows exactly what this did?
Gosh, I'm really shy, but if you all insist, I will write about those other tractors that I drove and loved. A little aside: A few years ago, when my father was still farming a little bit, I found a decent F-20 and bought it, thinking I'd restore it and use it on his farm. Bring back memories and all that. I lived quite a distance from his place and never really found the time to do the restoration. But one day, I decided to hook the old girl up to a Bush Hog and go into one of those meadows that were studded with those things we called "hassocks" (don't know the botanical name)--a plant that made a very hard clump right in the middle. The experience reminded me of what a real handful an F-20 can be in rough ground. You sit out there on a stalk, which bounces up when the front wheels go down into a rut or a depression, and it bounces down when the front wheels go over something abruptly. The steering is beautiful as far as driving goes; the heavy iron wheel could actually be spun at the end of a row, but at the same time, if the front wheels went into a rut and you weren't watching yourself, the heavy iron wheel would act like a flywheel and come back and get your thumb, or that arm you had laid on a spoke while you lazily thought about something else. Well, that day kinda cured me of my romance with the F-20. Well, not really.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
