Posted by dave2 on October 21, 2008 at 23:45:31 from (84.170.136.148):
In Reply to: electrical short posted by Jeff Stevens on October 21, 2008 at 22:27:31:
Jeff Stevens said: (quoted from post at 22:27:31 10/21/08) It could just be something as simple as a bad ground..if you have a bad ground it will cause problems..make sure the ground cable is touching metal completely and not on paint or rust
Mine would groan itself into starting from the time I had bought it. Didn't pay it much attention because it was my first tractor and just figured at 40 years old, it should groan a little. Had to jump it one day and there was no real difference in the speed of cranking that I thought should be there.
The ground cable was real hot. Correded on both ends, but when I skinned a little insulation, the corrosion had worked it's way most of the way through the cable. Replaced both cables with sealed units from the parts store and it's like having a new tractor (ugly new tractor).
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.