Posted by ScottyHOMEy on October 20, 2008 at 15:59:03 from (70.105.249.63):
Sorry about the wise-acre response you got the other night about your mag question.
You know how to find the timing marks on your gears so I'll assume you have a manual of some sort and that the procedure there isn't working.
What have you done so far to the tractor or the mag? no telling whehter that mag drive gear is in registeror not.
Just as an initial reference point, you need to have your motor lined up to TDC on the compression stroke on #1 and the distributor rotor on the mag lined up to fire #1 as a rough starting point. If the mag will fit over the lug onthe drive gear (or is the lug on the mag???? Gawd, I'm foggy tonight) you can try timing it up by the book.
Two thoughts. If you're at TDC on exhaust rather than compression, you'll be 180* out and you can a) dismount the mag, bring the motor around to the next TDC and do it right, or b)just swap your plug wires around to make it work. Myself, I'd take pity on the next guy and go with (a).
The other thought is that the gear being in backwards suggests that it may be so far out of register that you can't pull a mag into time. It doesn't have the play that a battery-ignition distributor has. In that case, you'll need to do some wrenching to open up the timing case and get the gear back in proper register to have any hope of gettin' her runnin' right.
Let us know what you've done and where you are in relation to stuff being in the right place. We can gt you out if this and runnin'.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
