I wouldn't worry yet. It may just be finding it's own natural level.
Coolant will expand when it's heated (think of the overflow tank for the coolant in your car or truck). If you filled your motor cold up into the neck to just below the overflow, it would expand from there when you warmed it up, with no place to go except out the overflow. Go ahead and let it cool. It should settle down to about an inch below the bottom of the neck. If so, Id say you are fine. As long as you had it good and warm, it shouldn't overflow going forward other than a very little if you ever get it runninhg hotter than you have already.
That said, it did start overflowing fairly quickly given how slow these motors are to warm up and that makes me wonder if you have a sizable air pocket going in there somewhere. Air expands much more with heat than coolant will. Was/is the tractor on level ground when you filled it and were running it?
Uphill isn't really a problem as any bubble will make its way to the outlet at the front of the motor. If the tractor were pointed downhill, you could have a pretty significant bubble/air pocket at the rear of the head that could be heating quickly enough to force your coolant out.
You might try running the front of the tractor up onto a a couple of 2x planks which should raise it enough to move any bubble forward and out and see what that does to your coolant level. If you've been on level ground right along, I go back to the first point and suggest that it's just findin its natural level.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
