Any place that sells hydraulic parts will have breathers.
It's just a fancy pipe plug with a tiny hole drilled in it to allow air in and out.
You need to know the type and size of thread used on your hydraulic cylinder to get the right one. Some are NPT (standard iron pipe thread), some are O-ring.
Question: What kind of implements are you going to use with this? Some implements don't do well with "gravity down" (slow to lower) and some don't work at all (steering on a dual-rake hitch, for example).
Adding the two-way valve will make your tractor a lot handier, and you won't have to replumb the hydraulics every time you switch tractors. You can damage newer tractors by hooking one-way implements to a two-way valve, and "squealing the relief valve" when you lower the implement.
When you attempt to run a one-way cylinder with a two-way system, it works fine to raise, but when you lower, the tractor is trying to force oil down a hose that doesn't exist. This trips an internal relief valve which will protect the system for a short period, but if you hold it a long time, the oil will get very hot and the pump can get damaged.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.