Posted by karl f on October 02, 2008 at 10:56:30 from (209.188.106.159):
In Reply to: c153 motor swap posted by Kevin C. on October 02, 2008 at 07:24:52:
same block family. more than likely. But, Farmall and International models of 504 mount differently. Farmalls have frame rails, the IH models do not, so the front for sure is different. Look at different tractor models and the case ih parts book/website to see if you can make the modification or if you need a different block. look up the engines, they will come up on the website under C-135 and C-153. You can also obtain sleeves in many situations that allow you to bore a sleeveless engine like the 153 out, insert the dry sleeve and install a standard piston/ring set. Many machine shops can do this, although it is more laborious. Cost wise, a 135 might be cheaper, but you will lose some horsepower. finding a diesel might work, but i recall that discussion topic recently, so look back a week or so and refer to that.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
