Farmall & IHC Tractors Discussion Board |
Re: Wheel spacing on F-20
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall & IHC Tractors Discussion Board ]
Posted by Regularman on March 23, 2000 at 09:12:28 from (147.160.180.16):
In Reply to: Wheel spacing on F-20 posted by SuperCmore on March 23, 2000 at 08:36:01:
The '39 F-20, if still equipped with the correct wheels, could have several wheel spacings. First, the F-20 was manufactured in both the wide and narrow tread versions. This means the cast axle housings of the rearend were two different widths. Second, the '39 was originally equipped with split rim wheels with cast, dome shaped, centers. The rims had two ribs on them to choose from to attach the cast centers to and the cast centers could be turned "dish-in" or "dish-out" depending on width desired. The bottom line is this, if the tractor is equipped with the correct wheels for the model year you should be able to adjust the rear wheel spacing enough to get it on the trailer. hope this helps.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|