Posted by Steven f/AZ on August 24, 2008 at 08:52:46 from (24.156.15.203):
In Reply to: sickle mower posted by Tugb on August 24, 2008 at 06:49:01:
I'm going to assume your tractor is a Farmall 130...
There are several options for a sickle mower...
You can have a pull type, semi mounted, or fully mounted. I have all three and can say that I definitaly prefer the fully mounted. Then there is the choice between a pitman mower (stick that moves the sickle back and forth) or a pitmanless balanced head mower (modern type). There are many model numbers for each type of mower, as well.
Your 130 will have plenty of power for a 5', 6', 7', or 9' bar on any type of mower. If you are mowing very heavy hay, the 9' bar might have enough of a draft to pull the tractor slightly sideways...
If you have some specific questions, I have owner's manuals for the three mowers I own and a shop manual that covers just about every one of the IH balanced-head mowers... and a Blue Ribbon service manual for the balanced head itself. :)
This post was edited by Steven f/AZ at 08:53:24 08/24/08.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.