I would say that you have low clutch lock up pressure and if she slipped thru the clutch pak then it will not be long before it will be time for a rebuild . Now the down side is that you do need a few things to do a rebuild , one is a Spring compressore to Put new sels in he piston , and ya need a special fitting to screw into the test port and a gauge that can read atleast 600 lbs.. When you do get into to it having a cherry picker to help ya remove and install it as when removing the pto you must tip the rear of the unit down so not to bang and damage the pick up tube plus it's a bit heavy . If you go back into the archives i posted the part # for the special test fitting and this fitting can be bought from Case I H . On your tractor i would install the heavy duty clutch pac kit then set the lock up pressure with the hyd . oil warm at 245 lbs . If you do not have atleast and I T manual then get one for your tractor and read the section on the pto it will explain how to set the pressure .
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.