Posted by JRM on May 19, 2008 at 07:06:31 from (64.12.116.73):
I'm trying to get my F20 up and running. A little background, it was a good running tractor 2 years ago. A tornado hit my shop in July of 06, the F20 had minor damage and was driven out of the shop after we got all the debris off of it. It has sat outside until this past weekend. Water got in through a gap in the heat control valve and the motor was siezed. I got the motor freed up and have no spark.
I replaced the points and condensor. The coil was new about 2 years ago and I kept that. I took the mag apart, cleaned some light surface rust off of the armature and the pick ups. The magnetic still appears to be strong. I set the points a .013, the cap and distributer disc looked clean and the plug wire terminals are bright.
Any thing I'm overlooking? Is there a way to test the coil? Is it possible that the cap is water logged and needs to dry out? I tried plug wires from a different tractor and still had no spark. Any help would be greatly appreciated.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.