Posted by Ron-MO on May 15, 2008 at 04:59:36 from (63.87.140.3):
In Reply to: unburnt fuel posted by IH454 on May 14, 2008 at 15:47:58:
I agree with what someone else said about checking the float. A couple of the biggest problems I have fought were float problems. It it leaks it will be too heavy, and never stop the flow of fuel until you have way too much fuel in the bowl. Basically the same as having it set too high. Had one on a pickup and rebuilt the carb several times, then gave up and took it to someone and when I picked it up he told me if I had replaced the float it would have fixed it. He actually weighs the floats and if they are heavy he replaces. Really that is the only thing to go wrong with a float - leaking. On another I could actually hear the gas in the brass float. I found the leak, and since it was not available any longer I opened it up and dried it out, and soldered the leak. Problem solved. Other possibility is a plugged passage. I have fought those several times as well. Many times I have ran fine wires through them and blew them out fixing the problem. Good luck.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.