Posted by bc on March 06, 2008 at 18:32:49 from (66.140.173.77):
Hi, I just returned my borrowed oxy-acetylene set of bottles. Guess I need to spring for my own. Around here they get about $500-600 for a 10 year lease with refills and want it all up front. Ebay had some new bottles but I think my local gas company charges extra to bottle trade-ins. I have a metal band saw for some metal cutting.
I just picked up some metal for my front forks project and they used a plasma cutter. Guy says they are the best thing for slicing bread.
I priced some smaller 40 & 50 amp plasma cutters on ebay that are in the same price range as the bottles. One also included a tig welder with it.
I don't do that much and whatever I get won't be used too much. A guy says the plasma doesn't leave the slag, makes a smoother cut, and you don't have to hardly grind on it. The other factor is that it has to be around an electrical plugin along with an air compressor. The only other thing I have used the torch for is to heat up something to break it loose. Will a plasma do the same thing without cutting? I learned to braze with a torch but doubt I would ever do it much and I don't know if you can braze with a plasma, can you?
I have a small mig wire welder to do any light welding that I plan to do. It doesn't have a gas bottle.
What do you guys think? I know a guy who just bought his wife a new plasma cutter for a Christmas. He is really proud of her Christmas present!! Don't know what she got him.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
