Re: 706 Again

Posted by karl f on March 05, 2008 at 17:45:25 from (172.130.230.94):

In Reply to: 706 Again posted by Re: 460 is a knocking... on March 05, 2008 at 15:13:49:

K.B.-826 said: (quoted from post at 17:29:23 03/05/08) If the draft contol lever is all of the way forward, there will be very little flow to the remotes. This was IH"s attempt to give flow contol to the remotes, but it usually doesn"t work well.

actually, isn't it the position lever pushed all the way forward in the action control zone when the flow is restricted?

another cause of the hitch staying up: if your draft lever is all the way back (light), it will override the position control and can hold the hitch in the raised position.

the operators manuals say if an implement is unattatched to the hitch to put the draft lever all the way forward (heavy).

karl f

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]