Posted by TimWafer on January 10, 2008 at 17:49:31 from (170.215.198.98):
Well, I’m finally getting around to restoring my fathers Farmall H. I’ve just begun teardown and am in the parts gathering phase as well. One of the things I’ve always wanted to add to it was live hydraulics. I even went so far as buying a pump a few years ago but that’s as far as I got with that project. Now"s the perfect time to do it. My tractors serial # is FBH364132X which I believe makes it a 1951 model. (Correct me if I’m wrong). Engine # matches the serial #. It’s been a while since I bought the pump but I recall mention of having to change the front cover and possibly the cam gear to a more robust one as well. Thought I had to change them to ones from a Super H and maybe I should start looking for these parts now. Tonight I pulled the distributor and compared the pump to the front cover and distributor. To my surprise they seem to fit perfectly. Is a 51 model new enough to have the new front cover? How do I tell if I have the stronger cam gear? I’m not sure who made this pump. It has #’s all over it but wondered if anyone could tell just from this picture. Also missing is the manifold that would bolt to it for the lines to hook into. I suppose I can make one unless someone has an idea where to come up with one. I’m thinking Ill remove the lift-all pump and use that as the hydraulic reservoir. I’m open to advice & suggestions. Tim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
