Idaho Boy: The paper pulley would have been optional equipment on a SMTA by 1954. Probably always were optional, just that they were very common when the letter series tractors first came into production in 1939. By 1950 one almost had to fight to get one for a new tractor. They gave better belt traction on high hp belt work, however belt work was starting to disappear by the mid 1950s.
My dad bought a new W4 in 42 with a paper pulley. he traded in 1951 for a new H, supposed to be delivered with a new paper pulley. Dealer advised he couldn't get a paper pulley and if he wanted one he best switch the pullies. He did and that is how our 51 H had a paper pulley. Buy 1955, he traded the H for a 300. The 300 came with a 15" diameter steel pulley, and keeping the paper pulley was no longer an issue for dad. He wasn't using his pulley any how, everything was going pto. Belt pullies were clearly on there way out by 1955. I don't ever remember belting that 300 up in 35 years. We bought 3 more new tractors by 1965, and none of them even had a belt pulley.
Your buzz saw was probably built in a local blacksmith shop. I don't ever remember tractor manufacturers offering much in the line of buzz saws. There were a couple, but they just couldn't compete with local blacksmiths. You'd probably be as well off loading it for the scrap dealer first chance you get. Those things required at least 6 men, 10 if you were in big wood. I worked on a few of those crews, my dad had one and used to travel from farm to farm bucking up fire wood.
Suddenly around 1952 the buzz saw business died. Two men with chain saws could buck more wood per hour than than a six man buzz saw crew, and there was no lifting of long sticks. Dad kept his buzz saw a few years, it had fallen into a state of disrepair from lack of use. One spring he pulled it out, was thinking about using it, decided first to sharpen it. He was fileing when a fertilizer salesman drove in. The fertilizer salesman said, "Man don't use that thing, cut it up for scrap." he went on to tell my dad how his father and grand father had been using one, similar state of repair. The arbor came loose from the babbit bearings, flywheel, arbor and saw went flying cutting off his grand father's head. After the salesman left, dad dismantled the saw, saving the arbor, saw blade and flywheel. He hauled the rest to the dump. That was 1952, and that saw, arbor and flywheel stayed in my shed until 1978, and I had a chap come along, silly enough to offer me money for it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.