Farmall & IHC Tractors Discussion Board |
706/756 ???
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall & IHC Tractors Discussion Board ]
Posted by ben on February 23, 2000 at 10:37:33 from (209.19.4.1):
We had a 706D with the German Diesel. When my father bought it, it had the 56 series shifting on it. I have learned that it was common for folks to retrofit their 06 with 56 series shifting. But, I remember that it also had the 56 series grill - the gridiron style. I distinctively remember that the grill fastened by two pins on the top that inserted into the cast frame. My question is this: could this have possibly been a late model 706 that had some 56 series parts? Or, could you interchange a 56 series grill on the 706? I suppose if the holes weren't present on the 706's they could be drilled. I also remember that the TA lever was the 06 style (not chrome). The throttle lever was the long, skinny black cast variety as opposed to the short, bent, chrome style that was on our 856. Also, I remember that the PTO lever was one that was behind the seat as opposed to being to the left of the seat. The number plates definitely said 706 and the panels were white. I also remember two faded patches on the hood just above the 'Farmall' badges, on each side towards the front that looked like a sticker was once located there and the paint around it had faded at a different rate than the rest of the paint. It sort of reminded me of the shape of the SMTA decal. Did any 706/756's come with a sticker like this or were mine eyes playing tricks on me? So, was this just a retrofitted 706 or could it have possibly came equipped with some 56 series features from the factory? I'm looking to find this tractor and buy it back for sentimental purposes. Any chance anyone has seen it ;) (Northeast Iowa)? I replaced the steering and throttle assembly with one off of a 1256 that had the tilt steering. I also replaced the PTO lever with one that was located to the left of the seat. It was definitely a custom job. Darn good ol' tractor too.
Follow Ups:
Home
| Forums
Today's Featured Article -
Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|