The wire in question (I am thinking about the one that goes from the Amp gauge to the ignition switch) (if stock, it is a push pull little button with a mushroom shape on the operator side) if not stock, and has any other switch, it is going to the input to that switch. That wire is usually 14 gauge(I recommend heavier 12 gauge there). The fuse I am recommending is just like the ones used in stereos, but able to handle 30 amps with a 30 amp fuse. This will be a new addition to the system. The reason for it is to prevent melt downs and fires!. A spare can be placed in the box, or kept in a plastic case in the tool box. I also recommend a fusable link in the system placed in the 10 gauge wire going to the starter motor switch (battery cable side) from the amp gauge. This should be rated at a little over the rating of the alternator. This is also an item never mentioned in tractor discussions, and prevents meltdowns and fires. The fuse link is available at NAPA, and can be spliced into that wire near the starter switch. I do things to old tractors that modern tractors (and all automobiles) now have as standard because they prevent fire or harsh failure. JimN
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
