Farmall & IHC Tractors Discussion Board |
Re: Sealer for head gasket
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall & IHC Tractors Discussion Board ]
Posted by Mark J. Ryan on February 20, 2000 at 12:17:14 from (205.188.192.177):
In Reply to: Sealer for head gasket posted by Ken on February 20, 2000 at 10:32:26:
I've rebuilt many a tractor motor as well as car and racing motors. By far the best product to use is the Loctite/Permatex spray on copper gasket sealer. Many head gaskets you get now a days for the IH motors require some sort of sealer. I always spray on 3-4 light coats with each layer somewhat tacky before the next goes on. As for the rest of the motor use RTV blue on the valve cover and oil pan. Aviation grade sealer on all studs, bolts that go into the motor, and the expansion plugs. Let this aviation stuff dry for 12 hrs before starting the motor. A good rule of thumb is if the gasket is a cork type use RTV blue. If its thin paper or cellulose use the aviation grade sealer. Haven't had a leak yet on anything ive ever assembled. Hope this helps and if anyone out there dissagrees with me let me know I may just be a little over zealous when it come to preventing leaks.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|