Posted by Nat 2 on September 25, 2007 at 14:04:45 from (64.80.108.53):
In Reply to: 706 guages posted by ggg7lazy77 on September 24, 2007 at 11:34:08:
...and acting like a JERK is going to get you answers how? Man alive!
No, your question is not too dumb. Nobody knows the answer to the question! If anything, your question is too ADVANCED, and requires very specific knowledge that very very very few people have. It's not like asking what kind of oil to use in the engine; you want to know about the inner workings of a very delicate and intricate piece of equipment that most barnyard mechanics are afraid to even consider.
The long and short of it is, nobody works on gauges. If the gauge doesn't work, they either live with it or replace it with a working gauge, either used or new, OEM or aftermarket.
If you pull the gauge out of your tractor, notice that there is NO way to get in. There are no bolts, no screws holding it together. It is a SEALED unit. What little I know is, that the unit is assembled through the front, then the glass is added and the lens holder is crimped on.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.