Posted by Andy Motteberg on September 23, 2007 at 18:52:06 from (4.143.219.41):
Hi, A while back, I bought a 12 volt generator for my 1943 Farmall H because I converted it to 12 volts. I wired the entire tractor exactly how it said in Bob M's wiring diagrams. The tractor runs, but is NOT charging. I was told by the person I got the generator from that it came off his great running Farmall M and that it charged very well. The amp gauge DOES work. The generator has a cut-out on it. I thought maybe the points in the cut out were dirty, so I sanded them and still, no charge. Another question is, the headlights won't work on Dim lights or Bright lights. The lights have new 12 volt bulbs in them. My H has the 4 position light switch (high charge, low charge, dim lights, bright lights). I used 10 gage wiring for the generator and lights. The H runs nice, but no charge. What should I do about this? What should I check? I was also told the headlight switch was good. If you could help me with these problems, I'd appreciate it!!
1943 Farmall H c-152 4 cyl engine 12 volt generator w/cutout H4 magneto
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.