|
Farmall Tractors Discussion Board |
Re: Farmall C questions
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by Stan(VA). on December 11, 1998 at 05:05:58:
In Reply to: Farmall C questions posted by Steve Decatur on December 11, 1998 at 01:19:39:
Yes they made a snow blade that could be front or belly mounted. Don't remember a model number, but someone posted a picture of one on a model 240 Farmall (great,great grandson of the C) on the image depot that you can get to from the ATIS site. It uses a hydraulic cylinder where the one for the C uses arms to the rockshafts, but it's close enough to give you a good idea.
On the hydraulics I would verify that you have fluid (fill plug on left side of touch control reservoir under the gas tank), and possible clean the return screen (also left side of touch control, down low, I think held on with 3 bolts). You might want to describe what problems you're having with it though. Are the controls stuck? Do you ever hear the engine get under a load while moving them?
Stan(VA).
Follow Ups:
Post a Followup
|
