Farmall & IHC Tractors Discussion Board |
Farmall B - timing the engine when...
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Dave H (MI) on August 12, 2007 at 14:26:51 from (205.188.116.73):
Got the valve situation squared around and I DID find those marks after I used the wire in the cylinder trick. My instructions for timing the engine say that the rotor should be pointing roughly to the #1 spark plug wire when at TDC for #1. FIRST> Which side of the rotor? SECOND> Neither side points at the #1 plug wire. Is there something I should do or should I just follow the instructions and loosen the distributor, rotate about 30* clockwise past the #1 mark and then turn it back to get a spark from the coil wire. Sorry, I am typing fast here. There is a post from me on page 2 of this forum that has the instruction I am reading from. Main point of confusion I have is which end of rotor and what to do about it pointing in the wrong direction....hope that makes sense.
Replies:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|