Farmall & IHC Tractors Discussion Board |
Re: W 9 waterpump
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Barnheater on July 19, 2007 at 18:12:16 from (216.9.175.125):
In Reply to: W 9 waterpump posted by Barnheater on July 19, 2007 at 13:46:58:
I was just curious cuz the magneto turns backwards from the M. The engine pushes water out after its ran for a while & the head has been replaced, the pan was dropped with engine hot & pressured up & no signs of coolant leaking down into the crankcase. The engine is mounted in an M chassis which was done by someone else & I wasn't sure what parts were used from which eng. Also the radiator was replaced with a new one. I understand the coolant capacity of the M isn't as large as the W9, but it pushes coolant just driving it around & not even working it. I'm not familier with the W9 eng yet, just thought if the two w/pumps were alike that just maybe the W9 pump rotated opposite like the mag & that would create the pushing coolant problem I'm having. Thank you for all your help.
Replies:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|