Farmall & IHC Tractors Discussion Board |
Re: Just out of curiousity...
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Janicholson on January 28, 2007 at 15:57:36 from (66.173.50.139):
In Reply to: Re: Just out of curiousity... posted by JayWalt on January 28, 2007 at 14:35:23:
Jay, The clutch disk will come as an assembly, not seperate friction material. It is usually riveted together at a rebuilding company, or made new. The Rockford clutch style is the only one being reproduced, or produced, or rebuilt. So that is what you will get. Heavy duty driven disk is a four pad (or more) star shaped unit with springs in the center to reduce shock loading. The original might have a full circle of friction material, but they are not longer lived, nor better. Just a little more soft in engagenent. (go for the HD unit). Some extreme duty disks are ceramic. These will wear out the FW and Pressure plate as much as the ceramic, and work under sevier conditions, but not needed in your case (opinion). If there are loose parts, worn tips on the fingers, deep grooves in the friction surface, or ovaled out pivot points, I would replace the pressure plate as well. JimN
Replies:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|