Farmall & IHC Tractors Discussion Board |
w-6 fioble,s?
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Kirk in kansas, on January 25, 2007 at 18:45:39 from (65.171.115.248):
where do I find hyd part,s for a 51 W-6 standard? I need the little box, and lever that go on the inside of left fender, and the 2 nipple,s that join it all together, to the hoses that go in that cover on lower left side of seat, I have a metal stancion on the back for hose,s , But it not for a W-6 I dont think? Need steering gear,drag link,radius rod,& tie rod, they have tab,s welded to them so i cant use them, somebody tried power steering on this thing, and they had to weld all this suff together to make it work and a dumb steering damper on right side welded to radius rod, and weld,s all over spindle,s too with the drag link, on one side, & steering cylinder on other, arghhhh where,s a hood too, hole cut in end for 12 volt gen, H & M wheel,s on front end with 7-50-16 mud truck tire,s on front,s,(one side turned backward,s), dont know if it supposed to have light,s on front or not/ No hole,s under light stem hole,s on side of hood this thing need,s help BAD! all botched up
Replies:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|