Re: Pulling sleeves

Posted by barnrat on November 09, 2006 at 07:36:32 from (64.66.121.67):

In Reply to: Pulling sleeves posted by Fancy Farm on November 08, 2006 at 17:34:07:

I have a fancy sleeve pulling tool($800 used)made by OTC That sits on the top of the block and pulls them using a bottle jack. If you can't find one of them taking it to a machine shop is your best bet they can pull them. Sometimes the sleeves crack at the base, then a machine shop can bore them out. Plus a machine shop can clean up an dress the holes so new sleeves will go in better. Don't forget to freeeze those new sleeves and pull them out of the freezer right before you put them in.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]