Posted by Coytee on April 11, 2009 at 17:12:07 from (207.65.105.131):
Wifes cousins tractor again...I'm trying to fix several issues at once and this is the one that caused that decision to be made! (to try to fix several)
Symptom: He was cutting on mild slope couple weeks ago and steering quit (power). He shut down. 2 weeks ago we fired it up and everything worked FINE. We concluded he simply starved the pump on the hill and he was low on fluid.
He filled with hydraulic fluid and I commenced to cut one of the fields. About halfway through the field the steering became "weird". It was basically not responding as quickly as normal..as though it took another turn or so of the steering wheel to complete the turn of the front wheels. Shortly thereafter, the steering quit all together and as I went over the field to the side, the front wheels simply wobbled to the left or right, depending on the terrain. I finally ended up using the turning brakes to help guide the tractor to where I wanted it.
Parked it, fixed the PTO gasket leak, checked the hydraulic fluid and ...uhoh... it's still FULL.
Now.. (drats), as I'm typing this, I'm thinking...I SHOULD do two things... first, check the steering again which I presume won't work, but I should ALSO check the PTO.
I'd surmise if the PTO works fine then the hydraulic pump is fine and something else is killing the steering...if however, I don't have either, then what?
My first presumption is the pump might be bad. It's the original pump on this 30 year old tractor.
If I need to remove the pump, according to the diagrams I see on the caseih.com site, it appears as though this might be gear driven? I might just unbolt the attachments and unbolt it from the flange to remove it from the tractor??
Any "dangers" I should be concerned about if I intend on removing the hydraulic pump?
btw, wifes cousin said he recently checked for blockage in the hydraulic sump and there is supposedly no protection screen...so it was clear. I'm still a bit nervous about the accuracy of that statement.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
