Farmall & IHC Tractors Discussion Board |
Re: putting sleves back in
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Dubl J on September 24, 2006 at 10:06:36 from (66.99.246.226):
In Reply to: putting sleves back in posted by Baxter on September 24, 2006 at 09:04:08:
Couple of items to consider. First make sure the block is very CLEAN use some type of cleaning agent to get rid of all old residue from inside the block. Also use a pick or other sharp object to clean out the lip on the top where the sleve will insert into the block. Dirt likes to bulid up here and can cause the new sleve to not have the correct stick out. Second clean the new sleves inside and out with cleaning agent or soap, new sleves are shipped with a covering to protect them from rusting and this needs to come off before installing them. If you put them in the freezer be careful handeling them becaure they can break very easily. Another tip is to put a trouble light in the block to heat it up a little. You my want to put apply a little lock tite to the outside of the sleve to insure it stays in place. Make sure though it is rated for the correct temperature. The sleves should go in fairly easily, make sure they go in straight and do not bind up, and keep tapping them down until they hit home. JJ
Replies:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|