Generator Issues!!

Posted by Matt Compton on September 02, 2006 at 14:33:34 from (24.222.7.208):

Got two generator questions for two different tractors with 2 different problems!!

1. Farmall C. Bought tractor converted to 12V. I switched back to original, Generator has new brushes, and tested ok. NEW regulator out of box. Installed everything correctly, from my knowledge. WONT CHARGE. When I remove the wire at the bat terminal on Regulator and use my multimeter from Bat terminal on Reg to battery ground I get 7.25 Volts. (Charging Voltage) as soon as I hook the wire back up, the charging stops!! I tryed repolaring no change.

Second Charging Problem

2. Farmall H. Volt regulator installed new 2 year ago. New brushes in Gen yesterday, was never charging for the 5 years I owned it. Tractor will charge if touch Fields on regulator to Bat terminal on regulator. will charge for 20 seconds or so then stop, and have to re jump. sometimes it will charge for longer, but always stops after a bit.

Sorry for making you read so much!!

Any suggestions would be GREATLY appreciated!!

Thanks Again

Matt Compton
Summerside, PE Canada

Replies:

• Re: Generator Issues!! Haas 18:43:14 09/02/06 (0)
• Re: Generator Issues!! John T 16:20:02 09/02/06 (3)
  • Re: Generator Issues!! Patrick Martin 21:50:37 09/02/06 (2)
    • Re: Generator Issues!! John T 05:48:52 09/03/06 (1)
      • Re: Generator Issues!! Matt Compton 16:21:59 09/03/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]