Farmall & IHC Tractors Discussion Board |
Re: 706 282 rebuild
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Hugh MacKay on August 21, 2006 at 20:19:27 from (64.228.11.53):
In Reply to: 706 282 rebuild posted by LD in PEI on August 21, 2006 at 19:25:32:
Layton, I presume, having a 706, with a 282 and in PEI. Those shims have a purpose, but I also expect you may have variations depending on the source of your new sleeves and pistons. Take care to get this one right. Rebuilt 282s have a reputation of sleeves moving vertical, until it breaks rim off the top end of sleeve. It then draws the sleeve down into crankcase with piston. That alone is not your real problem. The real problem occurs when the piston comes back up. The usual result is a hole in block the size of your head. I had this happen with my 560, clocked up well over 9,000 hours on the original engine. Put in new piston and sleeve kit and about 2,000 hours later, bango, 2 pistons in the barn yard. I have talked with several other people that had same experience both with 282 and 188 which is just 4 cylinders of the 282. In all cases it was aftermarket rebuild kits. I expect all one can get today will be aftermarket, even at CaseIH. Use caution and get good advice.
Replies:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|